Loading

Requesting location access...

Something went wrong while loading pickup times.

Select pickup time

Loading
Loading

Select pickup location

    Loading

    Select delivery option

      Loading

      Enter your postal code

      No pickup locations near you. Try another postal code. Delivery rates are unavailable for your postal code or cart contents.

      Loading

      Inventory by location

      £53.70

       Deep Matt Finish

       Water Bourne, Smooth Matt Masonry Paint

       Ultra Low VOC's

       Highly Moisture Vapour Permeable

      CLICK & COLLECT OR NEXT DAY DELIVERY AVAILABLE

      QUICK & EASY
      PAYMENTS

      ONLINE
      EXPERT SUPPORT

      CLICK & COLLECT OR NEXT DAY DELIVERY AVAILABLE

      QUICK & EASY
      PAYMENTS

      ONLINE
      EXPERT SUPPORT

      Availability: 2 In Stock
      Sku: A0008571

      Finngard  is a Water-based, matt acrylic masonry paint for use on new and previously painted surfaces where a matt decorative finish is required.

      ADS Colour Match all major Trade, Retail & Designer brands and of course the Tikkurila colour range

      Please contact store for your requirements




      Finngard  is a Water-based, matt acrylic masonry paint for use on new and previously painted surfaces where a matt decorative finish is required.

      ADS Colour Match all major Trade, Retail & Designer brands and of course the Tikkurila colour range

      Please contact store for your requirements




      Waterborne, silicone facade paint. For use on traditional lime-cement and cement plasters, mineral plasters thinfilm polymer, acrylic and concrete surfaces. Can be used for renovation of dispersion and mineral (silicate) surfaces.
      Especially recommended for renovation of thermal insulation systems made of expanded polystyrene and mineral
      wool. The product is suitable for use inside the buildings for areas not intended for permanent human stay (for
      example: garages, basements, warehouses, etc.).

       

      More Information
      For Interior or Exterior UseExterior
      SurfaceMasonry
      Product CategoryTopcoat
      Sheen LevelMatt (6-10%)
      Product CertificationsCE
      VOC LevelsUltra Low (5-49 g/l)
      BrandTikkurila
      Application MethodAirless, Spray, Brush, Roller
      Theoretical Cover Rate6-9 m2/l per one coat. See TDS for full details
      ThinnerWater
      Waterbased or SolventbasedWater
      Minimum contentMinimum contents are the can size less 10%
      Single Pack or 2 packSingle Pack

      APPLICATION INSTRUCTIONS
      Application method: Roller, spray or brush.
      Surface preparation: The substrate must be load-bearing, dry and clean. Humidity of
      painted substrates should not exceed 4%. Products can be
      applied min. 16 hours after priming with Tikkurila Finngard Uni
      Primer. The product is suitable for use in commercial form, and
      before use requires careful mixing, if necessary thin the paint
      max. up to 5% with water. Apply two coats in min. 12 hours
      intervals. In order to avoid streaking and discoloration apply the
      paint in continuously way. Technological breaks schedule at the
      edges of the walls. Provide adequate amount of paint from one
      production batch. The paint from different batches should be
      mixed before use. Do not apply on lime coatings.
      Raw surfaces (previously
      not painted):
      The surfaces of new cement-lime, cement and concrete seasoned
      min. 4 weeks. Remove loose particles from the surface, dirt,
      greasy stains and salt efflorescence. Remove algae, lichens and
      fungi with Tikkurila Homeenpoisto or Bio wash Cleaner according
      the instruction of their use. Wash the facade with water at high
      pressure. Unevenness and cracks equalize with mortar with
      composition similar to the original. Prime the surface with
      Tikkurila Finngard Uni Primer.
      Previously painted surfaces: Remove loose and detached elements of the surface, peeling
      paint, dirt, greasy stains and salt efflorescence. Wash the facade
      with water at high pressure. Permanently remove algae, lichens
      and fungi with Tikkurila Homeenpoisto or Bio wash Cleaner
      according the instruction of their use. Remove the chalky
      substrate (e.g by blasting). Unevenness and cracks equalize with
      mortar with composition similar to the original. Prime the surface
      with Tikkurila Finngard Uni Primer. Before the renovation of old
      coatings should be performed test application that will assess the
      adhesion of the new paint to the painted surface, e.g by cross-cut
      and allow for evaluation of the appearance and color of the
      coating. A positive result determines the use of the product.

      Before washing tools should be thoroughly wiped in order to remove as much paint.

      Clean after the completion of the work.

       Deep Matt Finish

       Water Bourne, Smooth Matt Masonry Paint

       Ultra Low VOC's

       Highly Moisture Vapour Permeable

      Just added to your wishlist:
      My Wishlist
      You've just added this product to the cart:
      Go to cart page