£17.62

Sadolin Polyurethane Extra Durable Varnish offers all the benefits of a water borne varnish 

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 193 In Stock
Sku: A0006025

Sadolin Polyurethane Extra Durable Varnish offers all the benefits of a water borne varnish  low odour, quick drying and a fast recoat time.


The inclusion of combined polymer chemistry gives a tough, hard wearing finish; resistance to stains and spills; an easy to clean surface.

Sadolin Polyurethane Extra Durable Varnish offers all the benefits of a water borne varnish  low odour, quick drying and a fast recoat time.


The inclusion of combined polymer chemistry gives a tough, hard wearing finish; resistance to stains and spills; an easy to clean surface.

 

    • • Extremely tough and hard wearing

 

    • • Touch dry in under one hour

 

    • • Non yellowing



• Interior wood and furniture including skirting, doors, tables. shelving, banisters, shelf rails etc

 

BrandSadolins
Sizes1lt, 2.5lt
Sheen LevelsMatt, Satin, Gloss
Coverage
 up to 12m²/litre
Drying Times
Touch dry1 hour
Recoat time2-4 hours
MPN5038036, 5038013, 5038010, 5038030, 5038012, 5038028
GTIN5010131470981, 5010131470974, 5010131470998, 5010131471179, 5010131471162,  5010131471155

How To Apply Sadolin Extra Durable Polyurethane Varnish

 

Sadolin Polyurethane Extra Durable Varnish should be applied in full flowing coats, laying off in the direction of the grain, ensuring all surfaces and end grains are fully coated.

 

For best results use a good quality, synthetic fibre bristle brush specifically designed for the application of water borne products.

 

Following surface preparation in accordance with the manufacturers recommendations, finish with 3 full coats of Sadolin Polyurethane Extra Durable Varnish allowing a minimum of 2 hours drying between coats.

 

Avoid over brushing as this will cause brush marks and result in a poor quality finish.

 

Carefully denib between coats using a fine grade nylon abrasive pad or a fine grade (P240 or finer) wet or dry silicone carbide abrasive paper in the direction of the grain.

 

Do not break through the surface coating. Remove all dust.

 

All subsequent coatings should be applied as soon as possible after the previous coat has fully dried.

Sadolin Polyurethane Extra Durable Varnish offers all the benefits of a water borne varnish 

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page