£13.33

Rust-Oleum Transparent Topcoat 2500 should be applied over Rust-Oleum Hard Hat Fluorescent Topcoats 2200 or Metallic Topcoats 2100

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 250 In Stock
Sku: C0000317





Rust-Oleum Transparent Topcoat 2500 should be applied over Rust-Oleum Hard Hat Fluorescent Topcoats 2200 or Metallic Topcoats 2100 or can be used to restore the gloss of faded old coatings.

Can be applied direct on several metals like: aluminium, brass, bronze, chrome and copper. Intended for small maintenance jobs or for touch-up.

Should be used in light industrial exposures, normal humidity and interior applications.

 






Rust-Oleum Transparent Topcoat 2500 should be applied over Rust-Oleum Hard Hat Fluorescent Topcoats 2200 or Metallic Topcoats 2100 or can be used to restore the gloss of faded old coatings.

Can be applied direct on several metals like: aluminium, brass, bronze, chrome and copper. Intended for small maintenance jobs or for touch-up.

Should be used in light industrial exposures, normal humidity and interior applications.

 

  • • Protection of copper, chrome, silver, bronze, nickel, aluminium
  • • Extra durability to metallic/fluorescent coatings
  • • Non-yellowing (UV-resistant)
  • • To handle after 30 minutes (at 20°C)
  • • Heat-resistant up to 100 °C

 

 

Size500ml
For use on

New, bare steel, blasted steel or galvanized steel surfaces
AppearanceGloss
Drying times 20°C/50% r.v. To touch

15 Minutes
Drying times 20°C/50% r.v. To RecoatWithin 1 hour 
Bindern/a
Heat Resistance

Up to 100°C  (Dry Heat)

Theoretical Coverage
3.5 m² per spay can at 25 μm dry
MPN

2500

GTIN

8715743006197

 

DIRECTION FOR USE

 

Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard.

Shake frequently during use. Hold can at least 25 cm from surface.

Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags.

Apply a single, thin layer and avoid application of thick layers. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.

 

Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags.

 

Apply a single, thin layer and avoid application of thick layers. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.

 

APPLICATION CONDITIONS

 

For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.

Rust-Oleum Transparent Topcoat 2500 should be applied over Rust-Oleum Hard Hat Fluorescent Topcoats 2200 or Metallic Topcoats 2100

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page