Loading

Requesting location access...

Something went wrong while loading pickup times.

Select pickup time

Loading
Loading

Select pickup location

    Loading

    Select delivery option

      Loading

      Enter your postal code

      No pickup locations near you. Try another postal code. Delivery rates are unavailable for your postal code or cart contents.

      Loading

      Inventory by location

      £4.78

      This is the hardest of all 'one pack' varnishes. An ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained. 

      CLICK & COLLECT OR NEXT DAY DELIVERY AVAILABLE

      QUICK & EASY
      PAYMENTS

      ONLINE
      EXPERT SUPPORT

      CLICK & COLLECT OR NEXT DAY DELIVERY AVAILABLE

      QUICK & EASY
      PAYMENTS

      ONLINE
      EXPERT SUPPORT

      Availability: 20 In Stock
      Sku: A0007253

      This is the hardest of all 'one pack' varnishes.


      An ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained.


      Formulatated for floors and areas of high wear.


      When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Floor Varnish Satin Finish followed by one or two coats of Floor Varnish Dead Flat Finish.

      This is the hardest of all 'one pack' varnishes.


      An ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained.


      Formulatated for floors and areas of high wear.


      When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Floor Varnish Satin Finish followed by one or two coats of Floor Varnish Dead Flat Finish.

      ideal for
      • wooden floors • cork tiles • stone • slate • brick • quarry tiles • wooden worktops

       

      unique qualities
      • dries fast cures fast   highly heat and water resistant • ultra hard • clear as glass • good resistance to alcohol, stains and chemicals • resistant to heel marks • sands to a high-grade finish • easy to apply 
      • wash brushes in water


      BrandPolyvine
      Pack Sizes1lt, 2lt, 4lt
      CoverageApprox. 10-20 sq. m per litre.
      Drying TimesApprox. 30 minutes @ 20degrees C / 70degrees F
      RecoatableApprox. 16 hours @ 20degrees C / 70degrees F,     Full Cure after 16 hours
      MPNVIHDWC4, VIHDWC5, VIHDWC7, VLS500, VLS1000, VLS4000
      GTIN729870010260, 729870010277, 729870010284, 5030777000922, 5030777000939, 5030777000946

      How To Apply Polyvine Heavy Duty Floor Varnish

       

      Polyvine H/D Floor Varnish can be applied by brush, spray or roller.

       

      Porous surfaces should be primed with H/D Floor Varnish diluted 10% with water, prior to applying a further 2 or 3coats.

       

      On wooden floors, light sanding in between coats may be necessary, if there is any raising off the grain.

       

      Allow 2 hours in between coats and 16 hours after final coat before full use.

       

      Do not use in temperatures below 5 °C / 40° F or in very high humidity.

       

      Lower temperatures will slow the final cure time.

      Any equipment used can be cleaned using soap and water before the clear coat dries. Wipe any excess off surfaces with a damp cloth. Any dried deposits will need a paint stripper to remove them.

      This is the hardest of all 'one pack' varnishes. An ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained. 

      Just added to your wishlist:
      My Wishlist
      You've just added this product to the cart:
      Go to cart page