Little Greene Intelligent ASP - All Surface Primer

Description Description
Technical Specifications
Application
Datasheets
Short Description
Reviews Reviews(0)

A water-based primer undercoat suitable for painting on all interior and exterior surfaces.

Ease of application on a diverse range of different surfaces and materials, combined with a speedy two-hour drying time, make this robust primer the go-to preparation for projects that need to be completed quickly.

With a low sheen of 5-8%, it is available in a wide range of colours.

Suitable for use under all Little Greene trim products

A water-based primer undercoat suitable for painting on all interior and exterior surfaces.

With a low sheen of 5-8%, it is available in a wide range of colours.

Suitable for use under all Little Greene trim products

Brand	Little Greene
Pack Sizes	1lt, 2.5lt
Theoretical Coverage	14 square metres per litre at 30 microns DFT (dry film thickness) (loss factors will apply in practice)
Recommended number of coats	1 or 2 as required
Touch Dry	1 Hour
Time to recoat	4 Hours minimum
Colour Availibility	All Little Greene colour card colours

Stir thoroughly before use.

Do not apply to surfaces when the ambient temperature is below 5o C or if there is a risk of rain during application or drying. To obtain good flow, apply generously but avoiding runs and sags.

Brushing: Use a high quality synthetic bristle brush that is suitably sized for the project at hand. New brushes should be conditioned by washing in clean water and thoroughly drying with a clean, lint free, cloth. Avoid immersing brush too far into the paint to prevent paint from entering the ferrule. Avoid drips and splashes by not overloading the brush. Apply paint in even strokes and only extend painting area such that a wet edge can be easily maintained. For the highest quality appearance, keep final brush strokes all in the same direction and never go over paint that has already begun to dry. For intricate items, or where high ambient temperatures/high air flow conditions cannot be avoided, the open time maybe extended with a 10 to 15% (v/v) addition of a propriety water based paint conditioner. This advice is also applicable to large flat areas; however, use of a paint roller is the recommended application method in such cases.

Roller: Use a short nap wool blend type sleeve for best appearance on smooth surfaces. Increase nap length for textured surfaces, as appropriate, to ensure even and thorough coverage. Keep final strokes all in the same direction, maintaining a wet edge throughout. Never be tempted to go over already drying paint as this will lead to lap marking and flashing. When high ambient temperatures/high air flow conditions cannot be avoided, the open time maybe extended with a 10 to 15% (v/v) addition of propriety water based paint conditioner.

Spray Finishing:

Conventional Thin with up to: 40%(v/v) water Tip size: 1.60 to 2.00 mm (62 to 78 thou) Air pressure: 0.28 to 0.41 MPa (40 to 60 psi)

Airless Thin with up to: 20%(v/v) water Tip size: 0.28 to 0.54 mm (11 to 21 thou) Pressure at tip: 12.6 to 19.6 MPa (1800 to 2800 psi)

Little Greene ASP Data Sheet Size: (49.8 KB)

A high opacity, low odour water based matt undercoat displaying excellent adhesion to existing aged alkyd finishes.