Zinsser AllCoat Water Based Exterior Satin Black

🖌️ Product Description 

Zinsser AllCoat® Exterior Satin | The Ultimate, All-Surface Paint

Transform and protect your exterior surfaces with the ultimate performance, water-based paint. Zinsser AllCoat® Exterior Satin is a mould-resistant formula that offers supreme protection to virtually any surface: wood, metal, masonry, plastic, UPVC, concrete, and cladding .

This self-priming, low-odour paint eliminates the need for a separate primer and often requires no sanding, even over glossy surfaces. Its advanced technology forms a flexible, vapour-permeable, water-shedding coating that resists cracking, blistering, and flaking, keeping your property looking perfect for years .

Why Choose Zinsser AllCoat Exterior Satin?

• Ultimate All-Surface Versatility: Perfect for timber, metal, UPVC, masonry, and more .

• Self-Priming Formula: No separate primer or sanding is needed for most applications .

• Superior Weather Protection: Resists cracking, blistering, and flaking .

• Mould & Algae Resistant: Contains a biocide to protect the dried film against fungal degradation .

• Breathes with Your Home: Flexible and microporous, allowing moisture vapour to escape .

• Excellent Colour Retention: Keeps your finish looking vibrant for up to 15 years .

• Quick Application: Recoat in just 1 hour. Fully cures in 7 days .

• Low Sheen Finish: A modern, subtle satin appearance that enhances any surface .

This durable paint is self-priming and can be applied to previously painted surfaces without sanding, even glossy paints, bitumen, or creosote . Two coats provide a low-maintenance, long-lasting finish that sheds water and resists the harshest weather .

📄 Technical Data Sheet

Overview

• Product Type: Water-based, all-surface exterior paint in a satin finish .

• Recommended Use: Ideal for wood, metal, masonry, plastic, UPVC, concrete, cladding, and more .

• Key Features: Self-priming, mould-resistant, weather-resistant, flexible, microporous .

Technical Specifications

• Base: Water-Based 

• Finish: Satin (Mid-Sheen) 

• Coverage: Up to 12m² per litre (coverage varies depending on surface porosity) 

• Touch Dry: 1 hour 

• Recoat Time: 1 hour 

• Full Cure: 7 days 

• Recommended Coats: 2 (3 for high-exposure areas like sills and fascia boards) 

• Application Methods: Brush, Roller, or Airless Sprayer 

• Volume Solids: Approx. 40% 

• VOC Level: Approx. 80 g/L (Low) 

• Colours: Available in White, Black, Anthracite Grey, and tintable to any BS, RAL or NCS colour 

Application & Surface Preparation

1. Preparation: Surfaces must be clean, dry, and sound. Remove all loose paint, dirt, grease, and mould .

2. Priming: AllCoat is self-priming. For bleeding knots or resinous timber, spot prime with Zinsser B-I-N® . For bare ferrous metal, use an anti-corrosive primer first .

3. Application: Stir thoroughly before use. Apply when air and surface temperatures are between 10-32°C .

4. Spraying: For airless spray, use a 0.017" tip at 2000-2500 PSI .

Limitations

• Not intended for use on exterior floors, decks, or surfaces subject to prolonged water submersion