£102.97

A two pack water based epoxy coating and finish paint for:-

   Concrete

   Steel

  Ceramic & Terracotta tiles,

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 4997 In Stock
Sku: A0005968
Bradite EW99 HD Floor & Wall 2 Pack QD Water Based Epoxy
Bradite EW99 HD Floor & Wall 2 Pack QD Water Based Epoxy Change Colour
×

ALL AVAILABLE COLOURS

Close

A two pack water based epoxy coating and finish paint, for concrete, steel,
ceramic and terracotta tiles.

  • Heavy-duty 2-pack water based epoxy coating for floors and walls.
  • Superior resistance to fork-lift traffic and chemicals.
  • No odour or tainting when in use.
  • Easy to clean finish making it ideal for hygiene sensitive areas, hospitals, food preparation areas, breweries and bakeries etc.

    A two pack water based epoxy coating and finish paint, for concrete, steel,
    ceramic and terracotta tiles.

    • Heavy-duty 2-pack water based epoxy coating for floors and walls.
    • Superior resistance to fork-lift traffic and chemicals.
    • No odour or tainting when in use.
    • Easy to clean finish making it ideal for hygiene sensitive areas, hospitals, food preparation areas, breweries and bakeries etc.
      • Heavy-duty 2-pack water based epoxy coating for floors and walls.
      • Superior resistance to fork-lift traffic and chemicals.
      • No odour or tainting when in use.
      • Easy to clean finish making it ideal for hygiene sensitive areas, hospitals, food preparation areas, breweries and bakeries etc.
      • Brand: Bradite
      • Pack: 5 Litre
      • Finish: Gloss
      • Number of Coats Required: 2
      • Thinners: Water
      • Surface Dry: 3 Hours
      • Minimum Overcoat Time: 14 Hours 
      • Minimum Application Conditions: Temperature > 10oC, RH < 65%
        (but must be 3 oC above dew point)
      • Time To Light Traffic: 24 hours minimum, after final coat
      • Full Cure: 6 Days
      • MPN: EW99
      • Ensure that new concrete or screeded surfaces have fully dried out. This can be tested by taping a piece of polythene or laying a rubber mat onto the surface, leaving it overnight and seeing if the surface has sweated by the following morning. If it is noticeably darker under the polythene or rubber mat, then the floor is still drying out and must not be painted.
      • Ensure that the substrate is thoroughly clean. Scrape off loose and flaking material and degrease using Bradite TD39 diluted with 9 parts clean water and a scrubbing action. Rinse with clean water.
      • New power floated and smooth floors should be primed using Bradite ES40 Floor Primer or etched using Bradite TA37 Pre-Treatment for Concrete, then washed with fresh water and allowed to dry. Etching may need to be repeated until all laitance (loose cemeticious material) has been removed and the surface has a rough, grainy profile.
      • To test concrete or screed floors are suitably prepared for painting, water dropped on the floor should soak in to give a dark patch, not droplets on the surface.
      • For larger areas Vacuum Blast Cleaning or Scarifying may be more appropriate methods of surface preparation. Wooden floors should be clean and sanded to a smooth finish.
      • Existing coatings should be checked for compatibility. They must be clean, sound, well adhered, well feathered and well abraded.
      • All surfaces must be dry and dust free before coating.
      • A number of Bradite floor coatings are suitable for external use. When painting external concrete it is important to check that the surface is above the water table and/or an intact DPM barrier is present.
      • When using floor paints please ensure that the finished floor is safe against slips in all likely conditions.
      • While the floor will take light foot traffic after overnight drying, full cure may take 4 days at 20⁰C and should not be subject to heavy traffic for at least 48 hours.
      • Please note that drying/curing times will vary depending on film thickness, temperature and relative humidity. Bradite Floor Paint DP5 is suitable for use in domestic and light commercial garages.
      • In the first seven days after application, vehicles should be left outside to allow tyres to cool down (especially after long journeys) to help prevent hot tyre pick up.
      • Spills of petrol and diesel should be cleaned up as soon as possible to reduce the danger of slip and to prevent discolouration of the floor paint.
      • Brake fluid is highly aggressive and will attack most floor paints on contact – use drip/capture pans when working on brake systems to prevent permanent damage to the floor paint finish.

      A two pack water based epoxy coating and finish paint for:-

         Concrete

         Steel

        Ceramic & Terracotta tiles,

      Just added to your wishlist:
      My Wishlist
      You've just added this product to the cart:
      Go to cart page