£32.95

Water-based primer for use on smooth floors, like power-floated concrete and tiles.

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 250 In Stock
Sku: A0003386

• Water-based primer for use on smooth floors, like power-floated concrete and tiles.


• For use on dense, smooth floors like power-floated concrete, quarry tiles and ceramic tiles.


• Product can be used in combination with all Rust-Oleum® or Mathys epoxy and polyurethane coatings.


• For any other coating, we recommend a test for suitability.

• Water-based primer for use on smooth floors, like power-floated concrete and tiles.


• For use on dense, smooth floors like power-floated concrete, quarry tiles and ceramic tiles.


• Product can be used in combination with all Rust-Oleum® or Mathys epoxy and polyurethane coatings.


• For any other coating, we recommend a test for suitability.

• Perfect chemical bond without blasting or etching

 

• Low material usage - A real cost saver

 

• Can be recoated with virtually any other 2K paint

 

• Water-based; low odour

 

• Excellent flow

BrandRustoleum
Sizes1lt, 5lt
Theoretical Coverage41m²/l. at 15 µm dry
ThinnersWater
Drying Times (at 20˚C):6 Hours
ApplicationBrush, Roller, Spray
MPN

3333.1, 3333.5

GTIN8715743008948, 8715743008955

how to apply Rustoleum 3333 super adhesive primer

 

Stir individual components thoroughly before mixing them together.

 

Use the boxing method or a lowspeed mixer.

 

APPLICATION CONDITIONS

 

Temperature of air and substrate between 10 and 35°C and relative humidity below70%.

 

The substrate temperature must be at least 5°C above dewpoint.

 

APPLICATION & THINNING: BRUSH

 

5 up to 10 vol. % with water. Use brushes based on a mixture of synthetic/natural bristles. Checkwet film thickness, avoid excessive film thickness. Preferably use disposable brushes.

 

APPLICATION & THINNING: ROLLER

 

10 up to 20 vol. % with water. Use short nap (4-6 mm) mohair or velvet brush rollers. Check wet film thickness, avoid excessive film thickness. Preferably use disposable rollers.

 

APPLICATION & THINNING: AIR-ATOMISED SPRAY

 

Up to 20 vol. % with water. Spray: Gravity cup and pressure cup. Tip size: 1.2 -2.0 mm. Atomizing pressure: 2 - 4 bar. Checkwet film thickness, avoid excessive film thickness.

 

CLEANING OF EQUIPMENT / SPILLS

 

Immediately after application with (hot) water and soap.

Water-based primer for use on smooth floors, like power-floated concrete and tiles.

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page