Fleetwood Advanced Satinwood is an advanced interior/exterior trim paint that produces a smooth, silky finish with fast drying time and low odour. This exceptional paint has been specially developed using a hybrid system combining a modified alkyd emulsion with an acrylic emulsion. This creates the same appearance and application process as standard traditional trim paint but with the benefits of modern paint technology.

Suitable for internal and external wood and metal, Advanced Satinwood has excellent opacity and is touch-dry in just 30 minutes, depending on temperature and humidity. Second coats can be applied within 2-4 hours, making this an easy paint to use. Suitable for most locations, including hospitals, care homes, schools and offices, it is BREEAM, EPD and LEED V4.1 compliant, with a VOC of 30g/l. Available in a range of colours.

• Performance

• Water-borne paint with good viscosity for even, smooth coverage on wood and metal trim
• Hybrid of acrylic and alkyd emulsions
• Applies and finishes like a traditional solvent-borne paint
• Low odour and VOC
• Less prone to yellowing
• Touch-dry in 30 minutes, recoat time: 4 hours, fully cured in 7-10 days
• Designed for commercial and domestic interiors and exteriors, and high-traffic areas
• Suitable for use in homes, offices, creches, schools, colleges, hospitals, and nursing homes
• Efficient coverage of up to 16m²/ltr

Indoor Air Quality

• Maximum VOC of 30.0g/ltr
• Conforms to EU 2010 Directive (Cat A/d) 130g/l
• Contains no added lead, making it suitable for all indoor and outdoor trims in locations such as nurseries, schools and hospitals
• Low odour formula means it can be used in high-traffic areas and private rooms in hospitals, schools, care homes and catering establishments

Capacity

• Application method by brush, roller, spray or airless spray
• Coverage of approximately 16m²/ltr on non-porous surfaces
• Reduce by up to 20% as required, depending on the delivery method
• Will work with most spray equipment
• Recommendations for airless spray: a minimum working pressure on paint of 140kg/cm2 (2000 Ib/sq in) with a spray tip size of 0.38mm to 0.46mm (15 – 18thou) spray tip angle 65°. Filter mesh 60.