Loading

Requesting location access...

Something went wrong while loading pickup times.

Select pickup time

Loading
Loading

Select pickup location

    Loading

    Select delivery option

      Loading

      Enter your postal code

      No pickup locations near you. Try another postal code. Delivery rates are unavailable for your postal code or cart contents.

      Loading

      Inventory by location

      £49.22

      Decorative 'hammered' enamel finish for metalwork

      CLICK & COLLECT ONLY ON ALL ORDERS

      QUICK & EASY
      PAYMENTS

      ONLINE
      EXPERT SUPPORT

      CLICK & COLLECT ONLY ON ALL ORDERS

      QUICK & EASY
      PAYMENTS

      ONLINE
      EXPERT SUPPORT

      Availability: 200 In Stock
      Sku: C0000458

      A single pack gerneral purpose high build fast drying prime

      Modified alkyd/zinc phosphate for general purpose, high build, fast drying primers for steel.


       

      A single pack gerneral purpose high build fast drying prime

      Modified alkyd/zinc phosphate for general purpose, high build, fast drying primers for steel.


       

      • Quick drying for improved productivity

       

      • Hides surface imperfections in metal.

      BrandDacrylate
      Pack Size5ltr
      ApplicationSpray only
      Theoretical Coverage

      10m2 per litre at depending on dry film thickness applied

      Drying TimeTouch Dry 20 Mins  Film Dry 2 Hours
      Thinners Brushingn/a
      Thinners SprayingDacrylate R11 Thinners
      Line No5H - Line

      how to apply dacrylate qd1 hammered finish

       

      All surfaces to be coated should be clean, dry and free from contamination.

       

      Prior to paint application all surfaces should be assessed and treated in accordance with ISO 8504:2000.

       

      Application conditions:

       

      This material should preferably be applied at temperatures in excess of 10°C. Relative humidity should not exceed 90% and in these conditions good ventilation is essential. Substrate temperature should be at least 3°C above the dew point and always above 0°C. At application temperatures below 10°C, drying and curing times will be significantly extended, and spraying characteristics may be impaired.

       

      Conventional spray:

       

      Tip size: 55 thou (1.4mm) Tip pressure: 40-60psi (2.7-4.1bar)

       

      Brush application:

       

      This product is not suitable to be brushed.

       

      Roller application:

       

      This product is not suitable to be rolled.

       

      Thinning:

       

      20% of Dacrylate Thinner R11 may be required when spraying the product to achieve optimum spray characteristics.

       

      Clean-up:

       

      Clean all equipment after use with Dacrylate Thinner R11. Do not allow product to remain in hoses, guns or spray equipment. All surplus product should be disposed of in accordance with appropriate regional regulations/legislation.

       

       

      View File<ahref="https://cdn.shopify.com/s/files/1/0154/8042/2448/files/Dacrylate_QD1_Hammered_Finish_Data_sheet.pdf?76623">Dacrylate QD1 Hammered Finish Data sheet  Size: (452.92 KB)

      View FileDacrylate Product Guide Size: (2.86 MB)

      Decorative 'hammered' enamel finish for metalwork

      Just added to your wishlist:
      My Wishlist
      You've just added this product to the cart:
      Go to cart page