£74.11

Concentrated, alkaline, non-flammable, virtually odour free cleaning and degreasing solution.

FREE SHIPPING On All Orders Over £30

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £30

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 200 In Stock
Sku: A0002623

Concentrated, alkaline, non-flammable, virtually odour free cleaning and degreasing solution.


After cleaning, remove any remaining water and allow the surface to dry, as moisture left on the surface or entrapped into pores may cause premature failure of the coating system.


Colour: transparent.

Concentrated, alkaline, non-flammable, virtually odour free cleaning and degreasing solution.


After cleaning, remove any remaining water and allow the surface to dry, as moisture left on the surface or entrapped into pores may cause premature failure of the coating system.


Colour: transparent.

 

    • • Removes grease, oil, proteins , dirt and many other contaminants from coated, mineral and metal substrates

 

    • • Use as additive for high pressure cleaning

 

    • • Low concentration is sufficient (3-5%)

 

    • • Non-flammable, virtually odour-free

 

    • • Can also be applied by brush, mop or broom

 

BrandRustoleum
Size5lt
Coverage

100m²/l. (using 1:20 dilution)
Dilution

1 : 20 (5%)
Application

Sponge, cloth, brush or broom
MPN14.5
GTIN

8715743004049

how to use rustoleum nd14 degreaser

 

To ensure homogeneity shakewell before use.

 

Scrape or sweep away grease, oil, dirt, mould and all other surface contaminations as much as possible. ND14 Cleaner/Degreaser can be applied diluted or concentrated with a sponge, cloth, brush or broom.

 

For normal cleaning a 3 - 5% concentration will be sufficient. The product should be diluted with cold water.

 

After use rinsewith plenty of fresh water. If a concentration of more than 5% is used, hot water rinsing is absolutely necessary.

 

As a high-pressure(steam)cleaning additive a 2% concentration is recommended.

 

After cleaning, remove any remaining water and allowthe surface to dry, as moisture left on the surface or entrapped into pores may cause premature failure of the coating system.

 

Large surface areas or poor drying conditions may require longer drying times before a coating system can be applied.

Concentrated, alkaline, non-flammable, virtually odour free cleaning and degreasing solution.

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page