£13.33

A fast drying zinc rich primer/topcoat based on an epoxy ester resin.

 

The product contains pure zinc and aluminium as pigment and provides cathodic protection.

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 250 In Stock
Sku: C0000318





A fast drying zinc rich primer/topcoat based on an epoxy ester resin.


The product contains pure zinc and aluminium as pigment and provides cathodic protection.


Should be used as a single coat in light industrial exposures, corrosive environments and high humidity areas. 


For use on damaged galvanized steel surfaces and is intended to be applied on small areas or for touch-up.




 









A fast drying zinc rich primer/topcoat based on an epoxy ester resin.


The product contains pure zinc and aluminium as pigment and provides cathodic protection.


Should be used as a single coat in light industrial exposures, corrosive environments and high humidity areas. 


For use on damaged galvanized steel surfaces and is intended to be applied on small areas or for touch-up.




 




 

    • • Sparkling aluminium finish (80% zinc, 10% alu)

 

    • • Compromise between a protection and finish

 

    • • For new, bare, rust free metal or galvanised steel

 

    • • Resists 340 hours of salt spray testing (DIN)

 

    • • Heat-resistant up to 450 °C

 

    • • To handle after 1 hour (at 20°C)

 

Size500ml
For use on

New, bare steel, blasted steel or galvanized steel surfaces
AppearanceSparkling
Drying times 20°C/50% r.v. To touch

10 Minutes
Drying times 20°C/50% r.v. To RecoatWithin 2 hours or after 48 hours
BinderEpoxy ester
Heat Resistance

450°C (dry heat)

Theoretical Coverage
1.2 m² per spay can at 35 μm dry
MPN

2117

GTIN

8715743005909

DIRECTION FOR USE

 

Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard.

 

Shake frequently during use. Hold can at least 25 cm from surface.

 

Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags.

 

Apply a single, thin layer and avoid application of thick layers. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.

 

APPLICATION CONDITIONS

 

For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.

A fast drying zinc rich primer/topcoat based on an epoxy ester resin.

 

The product contains pure zinc and aluminium as pigment and provides cathodic protection.

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page