£15.14

Deeply penetrating rust inhibitor

Pushes out moisture and air from within, stabilising rust 

 Paint conditioner which improves paint flow and eliminates brush marks

Improves adhesion of oil-based paints and prevents peeling

Improves coverage and uniformity of paint

Eases application of finishes in difficult conditions

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 200 In Stock
Sku: A0007158

MARINE OIL is a versatile, highly penetrating air drying oil that can be used alone or added to paint.

Used alone it provides a tough, flexible finish, driving out excess moisture and air; displacing it from rusted metal, so stopping rust.

Filling dry porous wood to stop paint peeling. Added to any oil or alkyd based coatings and it will give increased wet edge time, improved flow ability, greater adhesion and unlike damaging thinners, will maintain the inherent quality of the paint without affecting its appearance or drying times.


 


 

MARINE OIL is a versatile, highly penetrating air drying oil that can be used alone or added to paint.

Used alone it provides a tough, flexible finish, driving out excess moisture and air; displacing it from rusted metal, so stopping rust.

Filling dry porous wood to stop paint peeling. Added to any oil or alkyd based coatings and it will give increased wet edge time, improved flow ability, greater adhesion and unlike damaging thinners, will maintain the inherent quality of the paint without affecting its appearance or drying times.


 


 

• Interior and exterior use.
• Steel structures, railings, pipes, grills, stairs…
• Machinery, engine parts, trailers…
• Hulls, tanks…
• All Wood surfaces, dry, porous, soft & punky…
• Horizontal and vertical surfaces.

  • Brand: Owatrol
  • Sizes: 500ml, 1ltr, 2.5ltr
  • Colour: Clear
  • Application: Brush, Roller, Airless or HVLP Spray
  • Drying time: Touch Dry 12 hours
  • Re-coat time: 24-48 Hours

PAINT CONDITIONER
Prepare surface as per instructions on the paint can.
Remove all loose and flaking material.
Treat any organic growth with fungicidal solution or a mix of 1 part water to 1 part chlorine bleach (allow
bleach solution to sit for 15 minutes), rinse thoroughly and allow to dry.

RUST INHIBITOR
Surfaces must be clean, dry and free from oil, grease and other surface contaminants.
Remove all scale; loose and flaking rust and old paint back to a sound surface and edge.
Feather in any sharp edges.
Surfaces exposed to chemicals (acids, alkalis or salt deposits) should be washed using copious amounts of
water or steam cleaned. Allow to fully dry.
Severely contaminated surfaces should be cleaned using an appropriate solvent e.g. Acetone.
Do not remove firm rust.
Do not clean metal back to a bright finish.

 

Deeply penetrating rust inhibitor

Pushes out moisture and air from within, stabilising rust 

 Paint conditioner which improves paint flow and eliminates brush marks

Improves adhesion of oil-based paints and prevents peeling

Improves coverage and uniformity of paint

Eases application of finishes in difficult conditions

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page