£99.95

 Ideal for difficult conditions such as marine environments

 Accepts all paint types - Polyurethane, Epoxy, Chlorinated rubber, Car paints etc

 Stabilises the surface whilst penetrating the substrate, driving out excess moisture and air

 Provides a stable solid layer that other paints can firmly adhere to

 Minimal preparation required - Eliminates the need for sandblasting

 

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 200 In Stock
Sku: A0007159

OWATROL® C.I.P. (Corrosive Inhibiting Primer) is an anti-corrosive primer that possesses the penetrating properties of OWATROL® OIL with the added benefi t that it may be overcoated with any coating without the risk of it dissolving.

OWATROL® C.I.P. stabilises the surface penetrating deep into the substrate, driving out excess moisture and air to form a solid stable layer.

With OWATROL® C.I.P., sand or shot-blasted surfaces do not require immediate priming; a light rust coating will not affect its performance or the final result.


 


 

OWATROL® C.I.P. (Corrosive Inhibiting Primer) is an anti-corrosive primer that possesses the penetrating properties of OWATROL® OIL with the added benefi t that it may be overcoated with any coating without the risk of it dissolving.

OWATROL® C.I.P. stabilises the surface penetrating deep into the substrate, driving out excess moisture and air to form a solid stable layer.

With OWATROL® C.I.P., sand or shot-blasted surfaces do not require immediate priming; a light rust coating will not affect its performance or the final result.


 


 

• Interior and exterior use.
• Horizontal and vertical surfaces.
• New and rusted surfaces - Ferrous and non-ferrous metals.
• Steel superstructures, motor vehicles...
• Civil engineering and marine equipment.
• Railings, gates...
• Nautical ballast tanks.

Coverage:15m2 per litre
Tools:Brush, Roller, Airless Sprayer
Suitable for:Exterior & Interior use
Clean up:White Spirit
Drying Time:6 hours
Re-coating Time:24-72 hours depending on finish –  C.I.P. 24 hours; oil/alkyd paints 24-48 hours; high solvent paints i.e. 2 pack, urethane etc 48-72 hours
Suitable Surfaces:Ferrous and non-ferrous metals

Stir well before and during use.
Do not thin.
New surfaces
:
Prime with 1 coat of OWATROL® C.I.P. and allow to dry.
For surfaces subject to aggressive climatic conditions apply 2 priming coats.
Clean, lightly rusted or new unpainted rusty steel
:
Apply 2 coats of OWATROL® C.I.P. allowing drying time between coats.
Old severely rusted surfaces
:
Apply 3 coats of OWATROL® C.I.P. allowing drying time between coats.
OR
Apply wet on wet applications of OWATROL® OIL* until rust is fully saturated and allow to dry
24 hours.
Apply 2 coats of OWATROL® C.I.P. allowing drying time between coats.
Previously coated surfaces
:
Spot prime all exposed metal with 2 coats of OWATROL® C.I.P. allowing drying time between coats
Apply 3rd coat over entire area and allow to dry

 

View FileOwatrol CIP Product Sheet Size: (1.53 MB)

 Ideal for difficult conditions such as marine environments

 Accepts all paint types - Polyurethane, Epoxy, Chlorinated rubber, Car paints etc

 Stabilises the surface whilst penetrating the substrate, driving out excess moisture and air

 Provides a stable solid layer that other paints can firmly adhere to

 Minimal preparation required - Eliminates the need for sandblasting

 

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page