Loading

Requesting location access...

Something went wrong while loading pickup times.

Select pickup time

Loading
Loading

Select pickup location

    Loading

    Select delivery option

      Loading

      Enter your postal code

      No pickup locations near you. Try another postal code. Delivery rates are unavailable for your postal code or cart contents.

      Loading

      Inventory by location

      £54.00

      For use on bare wood, our Interior Wood Primer & Undercoat helps create a smooth base on which to build up a rich top coat of Estate Eggshell, Full Gloss, Modern Eggshell or Dead Flat.

      CLICK & COLLECT OR NEXT DAY DELIVERY AVAILABLE

      QUICK & EASY
      PAYMENTS

      ONLINE
      EXPERT SUPPORT

      CLICK & COLLECT OR NEXT DAY DELIVERY AVAILABLE

      QUICK & EASY
      PAYMENTS

      ONLINE
      EXPERT SUPPORT

      Availability: 500 In Stock
      Sku:
      Farrow & Ball Interior Wood Primer & Undercoat
      Farrow & Ball Interior Wood Primer & Undercoat Change Colour
      ×

      ALL AVAILABLE COLOURS

      Close

      For use on bare wood, our Interior Wood Primer & Undercoat helps create a smooth base on which to build up a rich top coat of Estate Eggshell, Full Gloss, Modern Eggshell or Dead Flat.

      For use on bare wood, our Interior Wood Primer & Undercoat helps create a smooth base on which to build up a rich top coat of Estate Eggshell, Full Gloss, Modern Eggshell or Dead Flat.

       

        • Available in all Farrow & Ball colours

       

        • Available in 750ml, 2.5 litres and 5 litres

       

        • Covers up to 12 metres squared per litre

       

        • A water based primer & undercoat made using a traditional alkyd binder.

       

        • Water based, low odour and safe for children

       

        • Surface dry in 2 hrs, re-coatable in 4 hrs

       

        • Easy to clean up – wash brushes in warm soapy water

       

       

      BrandFarrow & Ball
      Pack sizes750ml, 2.5ltr, 5ltr
      CoverageUp to 12 square metres per litre
      No of coats2x
      Surface Dry2 Hours
      Recoat4 Hours
      Colour availibilityAll Farrow & Ball colours

      BRUSHING:

       

      Stir thoroughly before use. By „trim‟ we mean: skirting boards, picture rails, dado rails, doors, door frames and architraves, interior window sills and window frames (providing they aren‟t plastic). Farrow & Ball paints are water borne, and unlike solvent borne paints, water borne paint is more resistant to sagging and you will achieve the best finish by painting a thicker coat. For best results use a quality fine-tipped synthetic bristled paint brush (e.g. Farrow & Ball Paint Brush). Load the brush well and apply a generous first coat. Brushing first in a vertical direction then in a horizontal direction until an even coating has been applied. Finish by 'laying off' the paint in one direction using light pressure, with the brush held at an angle of approximately 30°. Do not “overwork” the paint or attempt to brush it out in thin even coats as you would a traditional solvent borne paint as this may create excess brush marks. Allow to dry completely (for a minimum of 4 hours) before applying a second coat following the same technique as before.

       

      ROLLER:

       

      Stir thoroughly before use. By „trim‟ we mean: skirting boards, picture rails, dado rails, doors, door frames and architraves, interior window sills and window frames (providing they aren‟t plastic). This paint finish can also be applied using a Medium Pile Woven Polyester Roller. This will provide a good finish with minimal stippling and is a quick method of application. However, where an optimum finish is required, we would recommend brush application using a Farrow & Ball fine-tipped, synthetic bristled brush.

       

      SPRAYING:

       

      Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Airless Spraying – Good results can be achieved by the set up of either 15 thou (381μm) 65° angle tip or 18 thou (457μm) 65° angle tip using a pressure of 2700 psi (186 bar). HVLP Spraying – Depending on the apparatus used, the paint may need to be diluted with water by up to 30%. Experiment with air control valve, material flow adjustment, fan size and spray pattern settings on a piece of cardboard or an inconspicuous area until a satisfactory finish is achieved. Apply several thin coats, allowing each coat to dry fully before applying the next one.

      For use on bare wood, our Interior Wood Primer & Undercoat helps create a smooth base on which to build up a rich top coat of Estate Eggshell, Full Gloss, Modern Eggshell or Dead Flat.

      Just added to your wishlist:
      My Wishlist
      You've just added this product to the cart:
      Go to cart page