£86.38
£60.46

High-build coating for protection of mild steel and galvanised steel, including lighting columns, street furniture, metal fencing plus general industrial plants. 

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 200 In Stock
Sku: DAC47LIN0100
Dacrylate 5lt Solvent Borne Acrylic Vinyl Sheen Finish Cladding/Mild Steel/Galvanised Steel Paint
Dacrylate 5lt Solvent Borne Acrylic Vinyl Sheen Finish Cladding/Mild Steel/Galvanised Steel Paint Change Colour
×

ALL AVAILABLE COLOURS

Close

Dacrylate 47 line is a high build vinyl sheen finish coating (Please note we can also supply this product in a gloss finish if required).

The product is ideal for application to plastisol cladding and is also used for the¶ÿprotection of mild steel and galvanised steel, including lighting columns, street furniture, metal fencing plus general industrial plants.

++As there are many types of cladding we always recommend doing a test area first++

Dacrylate 47 line is a high build vinyl sheen finish coating (Please note we can also supply this product in a gloss finish if required).

The product is ideal for application to plastisol cladding and is also used for the¶ÿprotection of mild steel and galvanised steel, including lighting columns, street furniture, metal fencing plus general industrial plants.

++As there are many types of cladding we always recommend doing a test area first++

•  Weather resistant for extended durability
•  Excellent colour retention and gloss retention for excellent durability
•  Good adhesion, including to most plastics, for flexibility of use
•  Long term durability for up to 10 years to first maintenance

BrandDacrylate
Pack Size5ltr
ApplicationSpray, Roller or Brush 
Theoretical Coverage5.34m2 per litre at 75 microns dry film thickness
Drying TimeTouch Dry 1 hours   Film Dry 3 Hours
Thinners BrushingDacrylate R5 Thinners
Thinners SprayingDacrylate R5 Thinners
Line No47-Line

how to apply dacrylate acrylic vinyl sheen

 

Application conditions:

 

This material should preferably be applied at temperatures in excess of 10°C. Relative humidity should not exceed 90% and in these conditions good ventilation is essential. Substrate temperature should be at least 3°C above the dew point and always above 0°C. Do not apply at temperatures below 5°C. At application temperatures below 10°C, drying and curing times will be significantly extended, and spraying characteristics may be impaired.

 

Airless spray: Tip size: 11-13thou (0.27-0.33mm) Tip pressure: 2750psi (193bar) Conventional spray: Tip size: 55 thou (1.4mm) Tip pressure: 40-60psi (2.7-4.1bar)

 

Brush application: Apply using a ‘full’ wet brush. Avoid excessive ‘brushing out’. Do not ‘lay-off’.

 

Roller application: Apply using a ‘full’ wet roller. Avoid excessive ‘rolling out’. Do not ‘lay-off’.

 

Thinning: 5-10% of Dacrylate Thinner R5 may be required when spraying the product to achieve optimum spray characteristics. Clean-up: Clean all equipment after use with Dacrylate Thinner R5.

 

Do not allow product to remain in hoses, guns or spray equipment. All surplus product should be disposed of in accordance with appropriate regional regulations/legislation.

High-build coating for protection of mild steel and galvanised steel, including lighting columns, street furniture, metal fencing plus general industrial plants. 

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page