Loading

Requesting location access...

Something went wrong while loading pickup times.

Select pickup time

Loading
Loading

Select pickup location

    Loading

    Select delivery option

      Loading

      Enter your postal code

      No pickup locations near you. Try another postal code. Delivery rates are unavailable for your postal code or cart contents.

      Loading

      Inventory by location

      £26.40

      Pre-treatment for galvanised steel to improve adhesion of subsequent coating system.

      CLICK & COLLECT ONLY ON ALL ORDERS

      QUICK & EASY
      PAYMENTS

      ONLINE
      EXPERT SUPPORT

      CLICK & COLLECT ONLY ON ALL ORDERS

      QUICK & EASY
      PAYMENTS

      ONLINE
      EXPERT SUPPORT

      Availability: 200 In Stock
      Sku: C0000209

      Pre-treatment for galvanised steel to improve adhesion of subsequent coating system.


      Pre-treatment for galvanised steel to improve adhesion of subsequent coating system.


      • Improves the level of adhesion between primer and galvanising

       

      • Assists with assessment of surface cleanliness prior to coating application

       

      • Ease of application

      BrandDacrylate
      Pack Size5ltr
      ApplicationBrush
      Theoretical Coverage20-25m2 per litre
      Drying Time20-60 Minutes
      Thinners Brushingn/a
      Thinners Sprayingn/a
      Line No13 - Line

      how to apply dacrylate mordant solution

       

      Apply T-Wash sparingly ensuring the substrate turns and remains black when dry.

       

      Care must be taken not to apply excessively

       

      Application conditions:

       

      This material should preferably be applied at temperatures in excess of 10°C. Relative humidity should not exceed 90% and in these conditions good ventilation is essential.

       

      Substrate temperature should be at least 3°C above the dew point and always above 0°C. At application temperatures below 10°C, drying and curing times will be significantly extended.

       

      Clean-up: Clean all equipment after use with Dacrylate Thinner water. All surplus product should be disposed of in accordance with appropriate regional regulations/legislation.

       

      Brush application: Apply by brush to clean degreased surface and allow to dry.

       

      Avoid excess application and ‘ponding’. After drying, excess T-Wash should be wet-cleaned and remove surplus T-Wash and allow to dry.

       

      When dry, the galvanised surface should be ‘blackened’.

       

      Any areas still showing a bright galvanised surface indicates presence of contamination.

       

      Lightly abrade these areas, degrease and re-apply Mordant Solution.

       

      On weathered galvanising the appearance after treatment may vary from Black to Light Grey.

       

       

      Pre-treatment for galvanised steel to improve adhesion of subsequent coating system.

      Just added to your wishlist:
      My Wishlist
      You've just added this product to the cart:
      Go to cart page