£51.00

High Performance, quick drying floor paint available in BS, RAL & NCS colour ranges

  Interior & Exterior use

  Quick Drying

  Cross Linking

  For suitably prepared Concrete, Wood & Steel

  BS4800, RAL, NCS Colours

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 499 In Stock
Sku: A0007271
Bradite DP9 Floor-It High Performance Single Pack Water Based Floor Paint
Bradite DP9 Floor-It High Performance Single Pack Water Based Floor Paint Change Colour
×

ALL AVAILABLE COLOURS

Close

Bradite Floor-It is a high performance ambient cross-linking , quick drying floor paint that can be used inside or out

For use on bare or previously painted suitably prepared concrete, wood, steel, tarmac asphalt floors requiring an economical, hard wearing, flexible floor coating with good chemical and excellent water resistance

 

 

    Bradite Floor-It is a high performance ambient cross-linking , quick drying floor paint that can be used inside or out

    For use on bare or previously painted suitably prepared concrete, wood, steel, tarmac asphalt floors requiring an economical, hard wearing, flexible floor coating with good chemical and excellent water resistance

     

     

      Suitable Surfaces

      For internal/external wood, steel, concrete and other absorbent mineral substrates which are dry, free of
      contamination, dust, efflorescence laitance and have been properly prepared and primed.

      Suitably prepared and well adhered existing coatings including, polyurethane, epoxy and chlorinated rubber.

      External floor
      surfaces should be above local water table and/or have intact DPM barrier present.

      Compatibility with
      existing coatings should be confirmed by preparing and painting a test patch.

      • Brand: Bradite
      • Pack: 2.5Ltre & 5 Litre
      • Finish: Semi-Gloss
      • Number of Coats Required: 2
      • Thinners: Water
      • Surface Dry: 30 minutes
      • Minimum Overcoat Time: 1 Hour
      • Minimum Application Conditions: Down to 5 oC (but must be 3 oC above dew point)
      • Time To Light Traffic: 16 hours minimum, after final coat
      • Full Cure: 7 Days
      • MPN: DP9

      Drying times will be prolonged at lower temperatures.

      Application and use should always conform to the codes of practice described in BS 6150 and BS 5493.

      Brush and Roller - Supplied ready for use. Thin, if required, with up to 5% water.

      Conventional Air Spraying - Thin with 5-15% Water as required, tip size - 2.0mm, tip pressure 60psi (0.4MPa)
      approximately.

      Airless Spraying - Thin with 0 – 10% water as required, tip size - 18 thou (0.46mm) approximately, tip
      pressure - 2100 psi (15MPa) approximately

       

       

       

       

       

      High Performance, quick drying floor paint available in BS, RAL & NCS colour ranges

        Interior & Exterior use

        Quick Drying

        Cross Linking

        For suitably prepared Concrete, Wood & Steel

        BS4800, RAL, NCS Colours

      Just added to your wishlist:
      My Wishlist
      You've just added this product to the cart:
      Go to cart page