£144.42

Bona Traffic Natural is a 2-component waterborne polyurethane topcoat that seals are protects wooden floors

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 247 In Stock
Sku: D0000958NT

• Bona Traffic Natural is a 2-component waterborne polyurethane topcoat that seals are protects wooden floors


• Unlike conventional lacquers the surface, to the touch, feels more like raw, finely sanded wood, 


• For best impression of raw wood, combine with one coat of the primer Bona White


• Superior protection for commercial and public areas


• Easy to apply


• Classified EC1R for very low emissions and indoor air pollution



• Bona Traffic Natural is a 2-component waterborne polyurethane topcoat that seals are protects wooden floors


• Unlike conventional lacquers the surface, to the touch, feels more like raw, finely sanded wood, 


• For best impression of raw wood, combine with one coat of the primer Bona White


• Superior protection for commercial and public areas


• Easy to apply


• Classified EC1R for very low emissions and indoor air pollution




• Preserves the look and feel of pure wood 


• Superior protection for commercial and public areas


• Easy and safe to apply
• GreenGuard approved for low indoor emissions
• Non-yellowing
































BrandBona
No of coats2
CoverageUp to 8-10 per litre
Drying TimesReady for sanding/recoating: 3-4 hours* - Light use: 24 hours* Full hardness: 7 days*
Size5lt
MPN7312791918017
GTINWF1191846001


How To Apply Bona Traffic Natural


1.


Shake the Traffic bottle and add one bottle of Traffic Hardener; immediately shake the mixture thoroughly for 1 minute and then insert the enclosed filter.


If mixing smaller quantities of varnish then pour the required amount of varnish into a separate can.


1 litre of varnish corresponds to one part of hardener. 2 litres to two parts and so on.


The mixture of varnish/hardener should be used directly or at least within 4 hours.


2.


Apply the lacquer using a medium pile Roller.


Roll with a smooth flowing motion alternately across and with the grain of the wood avoiding accumulations of product.


Always maintain a “wet edge” to avoid overlaps.


Allow to dry before applying further layers of lacquer.


Anticipate slightly longer drying time for each layer that is applied.


3.


If necessary make an intermediate sanding using a screen or the Bona Scrad System grit P150 (or finer) and remove dust before applying the final layer of lacquer.


Note: If the previous layer of lacquer has been allowed more than 24 hours drying time then an intermediate sanding is always required.


The floor will take light foot traffic approximately 8 hours after the final application.


Allow the surface to dry for at least 1 week before covering with carpets or other floor coverings, or loading with heavy objects.


Also avoid damp mopping the floor during this time.


Cleaning & Care Of Bona Traffic Natural


Clean the floor with Bona Cleaner or Bona Wood Floor Cleaner and a microfibre pad.(These can be purchased together with a Bona spray mop).


For maintenance and upkeep of the surface, floors can be overcoated at intervals with additional coats of lacquer.


The frequency of this operation can be greatly reduced if Bona Freshen Up or Bona Wood Floor Refresher is applied periodically.


This will restore the appearance of a dull floor whilst still allowing further coats of lacquer to be applied without the need for sanding the floor back to bare timber

Bona Traffic Natural is a 2-component waterborne polyurethane topcoat that seals are protects wooden floors

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page