£75.49
When used in conjunction with Flameguard™ Ultra this Decorative thin film intumescent base coat delivers a Class 0 rating over solid timber, timber-faced boards and particle boards.

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 300 In Stock
Sku: A0006903
When used in conjunction with Flameguard™ Ultra this Decorative thin film intumescent base coat delivers a Class 0 rating over solid timber, timber-faced boards and particle boards.

Broflame™ Ultra is ideal for all types of interior timber in communal areas (e.g public buildings, schools and hospitals).


Together with Flameguard™ Ultra this system provides a means of achieving your desired colour scheme and finish, whilst providing the highest possible fire rating (Class 0) on the painted surface.


The paints are designed to inhibit surface spread of flame and heat release, providing vital escape time in the event of a fire.

When used in conjunction with Flameguard™ Ultra this Decorative thin film intumescent base coat delivers a Class 0 rating over solid timber, timber-faced boards and particle boards.

Broflame™ Ultra is ideal for all types of interior timber in communal areas (e.g public buildings, schools and hospitals).


Together with Flameguard™ Ultra this system provides a means of achieving your desired colour scheme and finish, whilst providing the highest possible fire rating (Class 0) on the painted surface.


The paints are designed to inhibit surface spread of flame and heat release, providing vital escape time in the event of a fire.


  • • Achieves Class 0 fire protection rating to BS476: Parts 6 and 7

  • • Hard wearing protective / decorative finish

  • • Water-based

  • • Apply by brush, roller or spray

  • • For all types of timber in communal areas
































BrandBolloms
Pack size5ltr
ColourWhite
ApplicationBrush, Roller or Spray
Coverage5m² 
Touch dry4 hours between coats
Hard dryAllow 24 hours before applying Flameguard Ultra Top Coats

Stir well before use.


Applied by brush or airless spray, can be applied by roller but must be subsequently laid off with a brush to achieve a smooth finish.


Broflame Ultra must not be thinned.


Coverage rates must be adhered to in order to achieve the Class 0 upgrade.


For brush application apply in two coats taking care to avoid runs or sags allow at least 4 hours between coats.


After the second coat leave 24 hours before applying Flameguard Ultra Top coats.


For airless spray use a pump such as a Graco Ultra Max II or equivalent. A 25 mesh (100 micron) filter is recommended.


Use a tip size of 0.019-0.029” (0.48-0.73mm) and tip pressure of 3500PSI (243kg/cm3 ).


The internal diameter of the hose should be 0.375” (9.5mm).


Throughout the period of application and drying the ambient and substrate temperature should be between 5-30°C with ambient relative humidity below 75%

When used in conjunction with Flameguard™ Ultra this Decorative thin film intumescent base coat delivers a Class 0 rating over solid timber, timber-faced boards and particle boards.
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page