£120.46

2x thicker than regular epoxies (125 micron dry)

Very resistant against abrasion and chemicals

Contains a high amount of rust inhibitors

Can be applied on metal and floors

Tintable in almost any colour

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 200 In Stock
Sku: R91HBE0100
Rustoleum 5lt 9100 High Performance Epoxy Coating Gloss
Rustoleum 5lt 9100 High Performance Epoxy Coating Gloss Change Colour
×

ALL AVAILABLE COLOURS

Close

Two-pack, glossy epoxy for metal. Very hard coating with high layer thickness.

Rustoleum 9100 is a 2-pack high build, chemical resistant epoxy

High corrosion resistance for metals and extremely hardwearing for concrete floors

Two-pack, glossy epoxy for metal. Very hard coating with high layer thickness.

Rustoleum 9100 is a 2-pack high build, chemical resistant epoxy

High corrosion resistance for metals and extremely hardwearing for concrete floors




      • High build coating (125 microns), very durable

 

      • Can be applied directly to sound rusted surfaces

 

      • Easy to apply and clean

 

      • Full colour intensity in one coat

 

      • Tintable in virtually any colour on ColourShop®

 

      • Suitable for metal protection and floors where a heavy duty high build coating is required




9100 Topcoats are designed for application on manually prepared rusted steel surfaces and can also be used on clean, blasted steel, primed steel, concrete and previously coated surfaces.

 

9100 Topcoats offer appropriate protection against strong chemicals, acids, alkalis and solvents; frequen

 

 

BrandRustoleum
Size5lt
Sheen LevelsGloss
Thinners160 (See Data Sheet)
Drying Times (at 20˚C):

Touch dry: 6h (9101 & 9101HS)- 8h (9101WG)


Dry to handle: 12h (9101 & 9101HS)- 16 h (9101WG)


Dry to recoat: After 16h within 72 h


Fully cured: 7 days (9101)- 10 days (9101HS & 9101WG) Pot Life: 3h (9101)- 2.5h (9101HS)- 2h (9101WG)


Induction Time: 30 min (9101)- 15 min (9101HS)- 20min (9101WG)

Theoretical Coverage6 m²/l (9101)- 7.3 m²/l (9101HS)- 7 m²/l (9101WG)
  
MPN9107.5, 9101.5
GTIN

8715743010811, 8715743010620

how to apply rustoleum 9100 high performance epoxy

 

Temperature of air and substrate between 10 and 35°C (for the 9100/9101WG between 0 and 15°C) and relative humidity below85%.

 

The substrate temperature must be at least 3°C above dewpoint.

 

APPLICATION & THINNING: BRUSH

 

Use natural bristles, long hair brushes.

 

Dilute up to 10 vol.% with Thinner 160 (do not dilute 9101HS).

 

Preferably use disposable brushes.

 

APPLICATION & THINNING: ROLLER

 

Use a medium nap polyamide (perlon) 16-20 mm rollers.

 

Roller application requires 2 coats to achieve recommended d.f.t.

 

Dilute up to 10 vol.% with Thinner 160 (do not dilute 9101HS)

 

Preferably use disposable rollers.

 

APPLICATION & THINNING: AIRLESS SPRAY

 

Tip size: 0.013-0.021 inch. Fluid pressure: 150 - 225 bar.

 

Avoid excessive film thickness. Up to 10 vol.% Thinner 160 (do not dilute 9101HS)

 

APPLICATION & THINNING: AIR-ATOMISED SPRAY Not recommended. CLEANING OF EQUIPMENT / SPILLS RUST-OLEUM Thinner 160.

2x thicker than regular epoxies (125 micron dry)

Very resistant against abrasion and chemicals

Contains a high amount of rust inhibitors

Can be applied on metal and floors

Tintable in almost any colour

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page